Thread (12 messages) flat view 12 messages, 2 authors, 2019-05-20
STALE2640d

[PATCH V2 2/3] Documentation: dt: binding: fsl: Add 'little-endian' and update Chassis define

From: Ran Wang <hidden>
Date: 2019-05-17 03:38:14
Also in: linux-arm-kernel, linux-devicetree, linux-pm, lkml
Subsystem: freescale soc drivers, open firmware and flattened device tree bindings, the rest · Maintainers: Christophe Leroy, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

By default, QorIQ SoC's RCPM register block is Big Endian. But
there are some exceptions, such as LS1088A and LS2088A, are Little
Endian. So add this optional property to help identify them.

Actually LS2021A and other Layerscapes won't totally follow Chassis
2.1, so separate them from powerpc SoC.

Signed-off-by: Ran Wang <redacted>
---
Change in v2:
	- None.

 Documentation/devicetree/bindings/soc/fsl/rcpm.txt |    8 +++++++-
 1 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
index e284e4e..058154c 100644
--- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
@@ -20,6 +20,7 @@ Required properites:
 	* "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm
 	* "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
 	* "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
+	* "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm
 
 All references to "1.0" and "2.0" refer to the QorIQ chassis version to
 which the chip complies.
@@ -27,7 +28,12 @@ Chassis Version		Example Chips
 ---------------		-------------------------------
 1.0				p4080, p5020, p5040, p2041, p3041
 2.0				t4240, b4860, b4420
-2.1				t1040, ls1021
+2.1				t1040,
+2.1+			ls1021a, ls1012a, ls1043a, ls1046a
+
+Optional properties:
+ - little-endian : RCPM register block is Little Endian. Without it RCPM
+   will be Big Endian (default case).
 
 Example:
 The RCPM node for T4240:
-- 
1.7.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help