Re: memcpy regression

Le 05/09/2015 02:08, Michal Sojka a écrit :

On 4.9.2015 21:49, Michal Sojka wrote:

quoted

On 4.9.2015 20:10, christophe leroy wrote:

quoted

Le 04/09/2015 16:35, Michal Sojka a écrit :

quoted

On Fri, Sep 04 2015, Christophe LEROY wrote:

quoted

Le 04/09/2015 15:33, Michal Sojka a écrit :

quoted

Dear Christophe,

my MPC5200-based system stopped booting recently. I bisected the 
problem
to your commit below. If I revert that commit (on top of
807249d3ada1ff28a47c4054ca4edd479421b671 = v4.2-6663-g807249d), my
system boots again.

Do you use mainline code only, or do you have home-made code ?

I use mainline only sources with non-mainline device-tree.

quoted

memcpy() is not supposed to be used on non-cacheable memory.
memcpy_toio() is the function to use when copying to non-cacheble 
area.

When I submitted the patch, I looked for erroneous use of memcpy() 
and
memset().
I found one wrong use of memset() that I changed to memset_io() but I
didn't find any misuse of memcpy().
But I may have missed one.

I attach my .config, if it helps. I have there

CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y

so arch/powerpc/platforms/52xx is probably the directory to look. 
Do you
see any mempcy misuse there?

I only found one suspect use of memcpy() in 
arch/powerpc/platforms/52xx/
It is in mpc52xx_pm.c but it's linked to CONFIG_PM which is not 
selected by your .config
I'll check in the drivers selected by your .config

In parallele, are you able to try with CONFIG_PPC_EARLY_DEBUG in 
order to try and locate the blocking point ?

I don't get any output from the system even with CONFIG_PPC_EARLY_DEBUG.

Hmm, there is no udbg console for MPC5200. I hacked something up and 
the earliest place I was able to initialize it is after 
early_init_devtree() in setup_32.c. Even with this console, I got no 
output when the problematic patch was applied. So the problem is 
somewhere earlier.

In early_init() in setup_32.c, there is the following comment:
/* First zero the BSS -- use memset_io, some platforms don't have caches 
on yet */

In that case, when does cache get activated ?

In move_device_tree(), called from early_init_devtree(), there is a call 
to memcpy().
Can you try replacing it by memcpy_io() ?

Christophe

---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus