RE: Linux on Ml410
flat view
From: John Linn <hidden>
Date: 2008-05-13 13:42:17
Hi Mojtaba, Did you build the FPGA bit stream yourself or get it from somewhere? Specifying ttyS0 means you should have a 16550 UART in the hardware build, do you? -- John -----Original Message----- From: <redacted> [mailto:linuxppc-embedded-bounces+john.linn=3Dxilinx.com@ozlabs.org] On Behalf Of mojtaba Sent: Tuesday, May 13, 2008 5:37 AM To: <redacted> Subject: Linux on Ml410 Dear all, I am trying to run linux 1.6.25 on ML410 board. When the system boot I receive this error: loaded at: 00400000 004CD19C board data at: 004CB120 004CB19C relocated to: 00404050 004040CC zimage at: 00404E3C 004CA0D1 avail ram: 004CE000 10000000 Linux/PPC load: console=3DttyS0,115200 root=3D/dev/xsa2 Uncompressing Linux...inflate returned FFFFFFFD exit I will appreciate it if somebody can kindly answer me? Regards, Mojtaba _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded