Linux on Ml410

Dear all,

I am trying to run linux 1.6.25 on ML410 board. When the system boot I
receive this error:

loaded at:     00400000 004CD19C
board data at: 004CB120 004CB19C
relocated to:  00404050 004040CC
zimage at:     00404E3C 004CA0D1
avail ram:     004CE000 10000000

Linux/PPC load: console=ttyS0,115200 root=/dev/xsa2
Uncompressing Linux...inflate returned FFFFFFFD
exit

I will appreciate it if somebody can kindly answer me?
Regards,
Mojtaba

Hi Mojtaba,

Did you build the FPGA bit stream yourself or get it from somewhere?

Specifying ttyS0 means you should have a 16550 UART in the hardware
build, do you?

-- John

-----Original Message-----
From: <redacted>
[mailto:linuxppc-embedded-bounces+john.linn=3Dxilinx.com@ozlabs.org] On
Behalf Of mojtaba
Sent: Tuesday, May 13, 2008 5:37 AM
To: <redacted>
Subject: Linux on Ml410

Dear all,

I am trying to run linux 1.6.25 on ML410 board. When the system boot I
receive this error:

loaded at:     00400000 004CD19C
board data at: 004CB120 004CB19C
relocated to:  00404050 004040CC
zimage at:     00404E3C 004CA0D1
avail ram:     004CE000 10000000

Linux/PPC load: console=3DttyS0,115200 root=3D/dev/xsa2
Uncompressing Linux...inflate returned FFFFFFFD
exit

I will appreciate it if somebody can kindly answer me?
Regards,
Mojtaba

_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

On Tue, May 13, 2008 at 5:36 AM, mojtaba [off-list ref] wrote:

Dear all,

 I am trying to run linux 1.6.25 on ML410 board. When the system boot I
 receive this error:

 loaded at:     00400000 004CD19C
 board data at: 004CB120 004CB19C
 relocated to:  00404050 004040CC
 zimage at:     00404E3C 004CA0D1
 avail ram:     004CE000 10000000

 Linux/PPC load: console=ttyS0,115200 root=/dev/xsa2
 Uncompressing Linux...inflate returned FFFFFFFD
 exit

Not good.  If you get an error like this during decompression then you
probably have some sort of memory error.  Are you using a reference
design, or have you built a new design?  Have you tested your

It could also be a corrupt kernel image.  How did you build it?  How
large is the image?

Cheers,
g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.