Re: MPC5200b MMC over SPI into PSC6

Nice to hear that, next week I'll try and let you know.

Thank you again for your support,
Fabrizio

On Fri, May 9, 2008 at 5:20 PM, Grant Likely [off-list ref] wrote:

On Fri, May 9, 2008 at 9:02 AM, Fabri [off-list ref] wrote:

quoted

Thanks for the patches, now some more rows are printed after RamDisk loading:

  Verifying Checksum ... OK
  Loading Ramdisk to 0fe68000, end 0ff49bf2 ... OK
Memory <- <0x0 0x10000000> (256MB)
CPU clock-frequency <- 0xbcd3d80 (198MHz)
CPU timebase-frequency <- 0x1f78a40 (33MHz)
CPU bus-frequency <- 0x7de2900 (132MHz)

zImage starting: loaded at 0x00400000 (sp: 0x0ff4a958)
Allocating 0x32d410 bytes for kernel ...
gunzipping (0x00000000 <- 0x0040d000:0x00730fd4)...done 0x30d150 bytes
Using loader supplied ramdisk at 0xfe68000-0xff49bf2
initrd head: 0x1f8b0808

Linux/PowerPC load:

                     ^^^^^^^^^^^^^^^^^^

Doesn't look like you are passing a kernel parameters line.  The
kernel probably is booting, but doesn't know where to output the
console.  Try adding "console=ttyPSC0,115200".

Cheers,
g.

quoted

--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.