MPC5200b MMC over SPI into PSC6

Hello, I have an embedded system with an on-board processor powerpc MPC5200B
and Linux kernel 2.6.22,
I must turn over to MMC SPI on the PSC6.

First, I
have enabled PSC6:

in ../arch/ppc/platforms/lite5200.c added PSC6 in SPI mode


struct mpc52xx_psc_func mpc52xx_psc_functions[] = {
{       .id     = 3,

                .func   = "uart",
        },
        {       .id     = 4,

                .func   = "uart",
        },
{       .id     = 5,

                .func   = "spi",
        },
};

in ..
/arch/powerpc/boot/dts/lite5200b.dts enabled PSC6 in SPI mode

              
// PSC6 in spi mode example
spi@2c00 { // PSC6
device_type = "spi";

compatible = "mpc5200b-psc-spi\0mpc5200-psc-spi";
cell-index = <5>;
reg =
<2c00 100>;
interrupts = <2 4 0>;
interrupt-parent = <&mpc5200_pic>;
};


Now on the menuconfig enabling these options:

$ make ARCH=powerpc
CROSS_COMPILE=powerpc-linux-gnu- menuconfig

Platform support  --->
   [*]
MPC5200 (L25R) bugfix support
   [*] Freescale Lite5200 Eval Board

Device
Drivers  ---> SPI Support --->
   [*] SPI support
  <*> Freescale MPC52xx
PSC SPI controller

this options settings the CONFIG_SPI_MPC52xx_PSC=y variable
into .config

When linux booting, if I debug ../driver/spi/mpc52xx_psc_spi.c,
see that:

bus platform: add driver mpc52xx-psc-
spi                                                                               


bus platform: remove driver mpc52xx-psc-spi
drivers/spi/mpc52xx_psc_spi.c:
of_register_platform_driver failed (-19)

why??
any idea??

Someone knows how
to enable mmc over spi on PSC6?


thanks Fabio