Re: 8360 custom board, ucc_geth TX errors on longer(?) packets

On Fri, 01 Feb 2008 12:52:25 -0600
Steven Hein [off-list ref] wrote:

The one main difference in this board is how eth0 is wired.
We have a Broadcom GbE switch part, and UCC1 eth is wired
directly to that switch (no PHY).   (This where I needed to

sounds like you ran into some h/w errata.  if on rgmii, you might
want to find a way to program the switch for rgmii with internal delay
(8360 rev.2 rgmii-id rx & tx; 8360rev2.1 rgmii-rxid (i.e. for rx
only)).  If not, I'd contact fsl tech support directly.

Kim