Re: add phy-handle property for fec_mpc52xx

On 1/9/08, Olaf Hering [off-list ref] wrote:

The new network driver fec_mpc52xx will not work on efika because the
firmware does not provide all required properties.
http://www.powerdeveloper.org/asset/by-id/46 has a Forth script to
create more properties. But only the phy stuff is required to get a
working network.

This should go into the kernel because its appearently
impossible to boot the script via tftp and then load the real boot
binary (yaboot or zimage).

Signed-off-by?

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.