Re: add phy-handle property for fec_mpc52xx

The new network driver fec_mpc52xx will not work on efika because the
firmware does not provide all required properties.
http://www.powerdeveloper.org/asset/by-id/46 has a Forth script to
create more properties. But only the phy stuff is required to get a
working network.

This should go into the kernel because its appearently
impossible to boot the script via tftp and then load the real boot
binary (yaboot or zimage).

---
 arch/powerpc/kernel/prom_init.c |   28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c

@@ -1487,6 +1487,34 @@ static void __init prom_find_mmu(void)
        else if (strncmp(version, "FirmWorks,3.", 12) == 0) {
                of_workarounds = OF_WA_CLAIM | OF_WA_LONGTRAIL;
                call_prom("interpret", 1, 1, "dev /memory 0 to allow-reclaim");
+#ifdef CONFIG_PPC_MPC52xx
+       } else if (strcmp(version, "EFIKA5K2") == 0) {
+               call_prom("interpret", 1, 1,
+                       " .\" Adding EFIKA5K2 Ethernet PHY\" cr"
+                       " s\" /builtin\" find-device"
+                       " new-device"
+                               " 1 encode-int s\" #address-cells\" property"
+                               " 0 encode-int s\" #size-cells\" property"
+                               " s\" mdio\" 2dup device-name device-type"
+                               " s\" mpc5200b-fec-phy\" encode-string s\" compatible\" property"
+                               " 0xf0003000 0x400 reg"
+                               " 0x2 encode-int"
+                               " 0x5 encode-int encode+"
+                               " 0x3 encode-int encode+"
+                               " s\" interrupts\" property"
+                               " new-device"
+                                       " s\" ethernet-phy\" 2dup device-name device-type"
+                                       " 0x10 encode-int s\" reg\" property"
+                                       " my-self"
+                                       " ihandle>phandle"
+                               " finish-device"
+                       " finish-device"
+                       " s\" /builtin/ethernet\" find-device"
+                               " encode-int"
+                               " s\" phy-handle\" property"
+                       " device-end"
+                       );
+#endif
        } else
                return;
        _prom->memory = call_prom("open", 1, 1, ADDR("/memory"));

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev