Hi Jon,

Convert MPC i2c driver from being a platform_driver to an open firmware version. Error returns were improved. Routine names were changed from fsl_ to mpc_ to make them match the file name

I did the same for my i2c-cpm. Tested with the frontprocessor driver (dbox2 specific) converted to new style. I'll post the new i2c-cpm, as well.

+static void of_register_i2c_devices(struct i2c_adapter *adap, struct device_node *adap_node)
+{
+	struct device_node *node = NULL;
+
+	while ((node = of_get_next_child(adap_node, node))) {
+		struct i2c_board_info info;
+		const u32 *addr;
+		const char *compatible;
+		int len;
+
+		addr = of_get_property(node, "reg", &len);
+		if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) {
+			printk(KERN_ERR "i2c-mpc.c: invalid entry, missing reg attribute\n");
+			continue;
+		}
+
+		info.irq = irq_of_parse_and_map(node, 0);
+		if (info.irq == NO_IRQ)
+			info.irq = -1;
+
+		compatible = of_get_property(node, "compatible", &len);
+		if (!compatible) {
+			printk(KERN_ERR "i2c-mpc.c: invalid entry, missing compatible attribute\n");
+			continue;
+		}
+		
+		/* need full alias i2c:NOF,vendor,device */
+		strcpy(info.driver_name, I2C_OF_MODULE_PREFIX);
+		strncat(info.driver_name, compatible, sizeof(info.driver_name));
+		request_module(info.driver_name);
+		
+		/* need module alias OF,vendor,device */
+		strcpy(info.driver_name, OF_I2C_PREFIX);
+		strncat(info.driver_name, compatible, sizeof(info.driver_name));
+		
+		info.type[0] = '\0';
+		info.platform_data = NULL;
+		info.addr = *addr;
+
+		if (!i2c_new_device(adap, &info)) {
+			printk(KERN_ERR "i2c-mpc.c: Failed to load driver for %s\n", info.driver_name);
+			continue;
+		}
+	}
+}

Should this go into some central file? Else we would have to copy it in any i2c bus driver that supports powerpc.
This would at least be i2c-cpm and i2c-gpio.

+static int mpc_i2c_probe(struct of_device *op, const struct of_device_id *match)
+{
+	int result = 0;
+	struct mpc_i2c *i2c;
+
+	i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	if (of_get_property(op->node, "dfsrr", NULL))
+		i2c->flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
+
+	if (of_device_is_compatible(op->node, "mpc5200-i2c"))
+		i2c->flags |= FSL_I2C_DEV_CLOCK_5200;
+
+	init_waitqueue_head(&i2c->queue);
+
+	i2c->base = of_iomap(op->node, 0);
+	if (!i2c->base) {
+		printk(KERN_ERR "i2c-mpc - failed to map controller\n");
+		result = -ENOMEM;
+		goto fail_map;
+	}
+
+	i2c->irq = irq_of_parse_and_map(op->node, 0);
+	if (i2c->irq == NO_IRQ) {
+		result = -ENXIO;
+		goto fail_irq;
+	}
+
+	result = request_irq(i2c->irq, mpc_i2c_isr, IRQF_SHARED, "i2c-mpc", i2c);
+	if (result < 0) {
+		printk(KERN_ERR "i2c-mpc - failed to attach interrupt\n");
+		goto fail_request;
+	}
+
+	mpc_i2c_setclock(i2c);
+
+	dev_set_drvdata(&op->dev, i2c);
+
+	i2c->adap = mpc_ops;
+	i2c_set_adapdata(&i2c->adap, i2c);
+	i2c->adap.dev.parent = &op->dev;
+
+	result = i2c_add_adapter(&i2c->adap);
+	if (result < 0) {
+		printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
+		goto fail_add;
+	}
+
+	of_register_i2c_devices(&i2c->adap, op->node);
+
+	return result;
+
+fail_add:
+	free_irq(i2c->irq, i2c);
+fail_request:
+	irq_dispose_mapping(i2c->irq);
+fail_irq:
+	iounmap(i2c->base);
+fail_map:
+	kfree(i2c);
+	return result;
+};

IMHO, there should be a node attribute to override i2c_adapter.class. Legacy i2c drivers (in particular v4l and dvb drivers) use this class to decide which adapter to bind to. dbox2 needs I2C_CLASS_TV_DIGITAL (4).

Thanks,
Jochen