Re: [PATCH 2/3] [POWERPC] fsl_soc: add support for gianfar for fixed-link property
From: Joakim Tjernlund <hidden>
Date: 2007-11-26 15:09:33
Also in:
lkml, netdev
On Mon, 2007-11-26 at 17:29 +0300, Vitaly Bordug wrote:
quoted hunk ↗ jump to hunk
fixed-link says: register new "Fixed/emulated PHY", i.e. PHY that not connected to the real MDIO bus. Signed-off-by: Vitaly Bordug <redacted> Signed-off-by: Anton Vorontsov <redacted> --- Documentation/powerpc/booting-without-of.txt | 3 + arch/powerpc/sysdev/fsl_soc.c | 56 ++++++++++++++++++-------- 2 files changed, 42 insertions(+), 17 deletions(-)diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index e9a3cb1..cf25070 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt@@ -1254,6 +1254,9 @@ platforms are moved over to use the flattened-device-tree model. services interrupts for this device. - phy-handle : The phandle for the PHY connected to this ethernet controller. + - fixed-link : <a b c> where a is emulated phy id - choose any, + but unique to the all specified fixed-links, b is duplex - 0 half, + 1 full, c is link speed - d#10/d#100/d#1000.
Good work! May I suggest adding a "d" to <a b c> where d is flow control - 0 no, 1 yes flow control or not just popped up here today so I got a use for it. Jocke