Re: [PATCH v3 9/9] add MPC837x MDS board default device tree

On Oct 14, 2007, at 7:37 PM, David Gibson wrote:

On Fri, Oct 12, 2007 at 09:28:48PM +0800, Li Yang wrote:

quoted

Signed-off-by: Li Yang <redacted>
---
 arch/powerpc/boot/dts/mpc8377_mds.dts |  288 +++++++++++++++++++++ 
+++++++++
 arch/powerpc/boot/dts/mpc8378_mds.dts |  268 +++++++++++++++++++++ 
+++++++
 arch/powerpc/boot/dts/mpc8379_mds.dts |  308 +++++++++++++++++++++ 
++++++++++++
 3 files changed, 864 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/mpc8377_mds.dts
 create mode 100644 arch/powerpc/boot/dts/mpc8378_mds.dts
 create mode 100644 arch/powerpc/boot/dts/mpc8379_mds.dts

diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts

b/arch/powerpc/boot/dts/mpc8377_mds.dts

[snip]

quoted

+	soc837x@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";

Drop this device_type.

quoted

+			compatible = "mpc83xx_wdt";
+			reg = <200 100>;
+		};
+
+		i2c@3000 {
+			device_type = "i2c";

And this one.

I've asked Leo to leave this one as all other fsl boards do this and  
the code depends on it.  There was some discussion about this but I  
wasn't sure if it was closed or not.

quoted

+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <e 8>;
+			interrupt-parent = < &ipic >;
+			dfsrr;
+		};
+

- k