Juergen wrote:

Pedro,

On Wednesday 19 September 2007 10:54, Pedro Luis D. L. wrote:

quoted

I=B4m also working with a Phytec pcm030, but I can=B4t get it booted...
Which kernel are you using?
I tried to apply the 7 bestcomm patches from Sylvain and patch over thes=

e

quoted

with this new ones that Domen released. The base kernel I=B4m using is
2.6.22.6 from kernel.org.
Although I used the patch that creates pcm030.c in arch/platforms/52xx/ =

and

quoted

compiled using this file, it gets halted at booting time.

Bytes transferred =3D 5091 (13e3 hex)
## Booting image at 00500000 ...
   Image Name:   Linux-2.6.22.6
   Created:      2007-09-19   8:53:02 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1196911 Bytes =3D  1.1 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
   Booting using flat device tree at 0x400000

(No more output and boot is halted)

=20
Check your oftree! Most of the time this behaviour means its a wrong oftre=

e in=20

use.

I=B4m using an specific pcm030.dts oftree that works for the 2.6.20 kernel.=
 I=B4m not quite familiar with the oftree stuff, but I thought it should wo=
rk also for the 2.6.22.6.
Is there any other dts file? Where can I find it?

Pedro.

PD: Sorry. I sent the previous message to Jon, Domen and someone else too b=
esides the list. I had some problems with the browser... Even sent twice th=
e message :-(

Juergen
=20
--=20
Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de
Pengutronix - Linux Solutions for Science and Industry
   Handelsregister: Amtsgericht Hildesheim, HRA 2686
       Vertretung Sued/Muenchen, Germany
  Phone: +49-8766-939 228 |  Fax: +49-5121-206917-9

_________________________________________________________________
Llama a tus amigos de PC a PC: =A1Es GRATIS!
http://get.live.com/messenger/overview=