Pedro,

On Wednesday 19 September 2007 10:54, Pedro Luis D. L. wrote:

I=B4m also working with a Phytec pcm030, but I can=B4t get it booted...
Which kernel are you using?
I tried to apply the 7 bestcomm patches from Sylvain and patch over these
with this new ones that Domen released. The base kernel I=B4m using is
2.6.22.6 from kernel.org.
Although I used the patch that creates pcm030.c in arch/platforms/52xx/ a=

nd

compiled using this file, it gets halted at booting time.

Bytes transferred =3D 5091 (13e3 hex)
## Booting image at 00500000 ...
   Image Name:   Linux-2.6.22.6
   Created:      2007-09-19   8:53:02 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1196911 Bytes =3D  1.1 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
   Booting using flat device tree at 0x400000

(No more output and boot is halted)

Check your oftree! Most of the time this behaviour means its a wrong oftree=
 in=20
use.

Juergen

=2D-=20
Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de
=A0Pengutronix - Linux Solutions for Science and Industry
=A0   Handelsregister: Amtsgericht Hildesheim, HRA 2686
=A0 =A0 =A0    Vertretung Sued/Muenchen, Germany
   Phone: +49-8766-939 228 |  Fax: +49-5121-206917-9