[patch 3/4] 4xx: Convert Walnut flash mappings to new binding
From: Josh Boyer <hidden>
Date: 2007-09-14 19:01:25
A new binding for flash devices was recently introduced. This updates the Walnut DTS to use the new binding. Signed-off-by: Josh Boyer <redacted> --- arch/powerpc/boot/dts/walnut.dts | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-)
--- linux-2.6.orig/arch/powerpc/boot/dts/walnut.dts
+++ linux-2.6/arch/powerpc/boot/dts/walnut.dts@@ -137,6 +137,10 @@ dcr-reg = <012 2>; #address-cells = <2>; #size-cells = <1>; + /* The ranges property is supplied by the bootwrapper + * and is based on the firmware's configuration of the + * EBC bridge + */ clock-frequency = <0>; /* Filled in by zImage */ sram@0,0 {
@@ -144,13 +148,16 @@ }; flash@0,80000 { - device_type = "rom"; - compatible = "direct-mapped"; - probe-type = "JEDEC"; + compatible = "jedec-flash"; bank-width = <1>; - partitions = <0 80000>; - partition-names = "OpenBIOS"; reg = <0 80000 80000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "OpenBIOS"; + reg = <0 80000>; + read-only; + }; }; ds1743@1,0 {
--