Re: STK5200 pci_enable_device problem

Hi,

[...]

quoted

It's not so easy to compile the PLX drivers on the 4.1 ELDK because of
missing headers in the ppc architecture. I managed to build the drivers
for the 2.6.19 kernel and I was able to work with the card except the
DMA routines (still working on this issue).

WHy don't you use the arch/powerpc configuration, then? Note that the
STK5200 has never been supported in a  2.6  kernel  with  a  arch/ppc
configuration.

Because I found at least a lite5200 configuration in the 4.1 ELDK (2.6.19.2 kernel) in the ARCH/ppc architecure. With ARCH/powerpc I only had a few configurations for other modules and I wasn't able to build a running kernel for the TQM5200 (maybe my fault).
Is there support for the TQM5200 and the STK5200 with ARCH/powerpc in newer kernels? I'm still using the 3.1.1 ELDK for the TQM5200 as it have everything I need and I don't need to use the PLX card in this board (although it would have been nice if I got it working...).

Bye,

-- 
Dipl. Ing. Oliver Rutsch