Re: STK5200 pci_enable_device problem

In message [ref] you wrote:

Which ELDK and kernel do you use? I had the same problem on this board 
with a PLX9054 based PCI card on a 2.4.25 kernel. I switched to the 2.6 
kernel and the 4.1 ELDK and the card was scanned correctly.
But keep in mind that the linux PLX drivers do not work out of the box 
with a big endian platform like the MPC5200. Although there is a 
BIG_ENDIAN flag in the makefiles there are still some places left in the 
driver code which have to be patched (the parts with int64 adresses).
It's not so easy to compile the PLX drivers on the 4.1 ELDK because of 
missing headers in the ppc architecture. I managed to build the drivers 
for the 2.6.19 kernel and I was able to work with the card except the 
DMA routines (still working on this issue).

WHy don't you use the arch/powerpc configuration, then? Note that the
STK5200 has never been supported in a  2.6  kernel  with  a  arch/ppc
configuration.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
"When the only  tool  you  have  is  a  hammer,  you  tend  to  treat
everything as if it were a nail."                    - Abraham Maslow