Re: external IRQ's

On 8/16/07, Scott Wood [off-list ref] wrote:

robert lazarski wrote:

quoted

Why <1d 2 1e 2 22 2> ? I can't seem to parse these numbers

They alternate between IRQ numbers and level/sense information, and the
IRQ numbers are the internal IRQ number plus 16.

Thanks, The "internal IRQ number plus 16" part is the info I was
lacking. However by 'internal IRQ' do you mean DMA? I just asked the
hardware engineer and that's what he thought you may have meant.

So in '1d'  the first cell is the irq and the second cell is the sense
level, how is the '1' calculated from 'internal IRQ number plus 16' .
Thanks for you patience, I'm just not getting that part yet.

quoted

- how do I
know what to use for my external interupts 1,2 for phy's 0,1 using a
88E1121R and for external interupts 3,4 for phy's 2,3 using a 88E1111
?

I thought it was interrupts 0-3, not 1-4?

It was 0-3 ;-)

If, like the CDS board, you have level-triggered active-low phy
interrupts, then <0 1>, <1 1>, <2 1>, and <3 1>.  If not, then choose an
appropriate value for the second cell based on booting-without-of.txt.

Kool, think I got this part. Do the 0-3 irq's in the mdio node
influence in any way the ethernet nodes irq's - the <1d 2 1e 2 22 2>
in this example ?

Thanks!
Robert