Re: System crash on boot_e500.S on 2.4Kernel

On Aug 15, 2007, at 17:46, mike zheng wrote:

Hi Andy,

Here is BDI output of the register value after line 212. The value  
of R6, R7 is 0x20, 0x160. However the value of SRR0(SPR26), SRR1 
(SPR27) is 0xfff81300 and 0x00001000. Why are they different from  
r7 and r6? We just did the mtspr, the value should be the same. The  
rfi jump to 0xfff81300 is because of the value in SRR0.

Yes, it's very strange.  But it's also pretty much impossible for the  
mtspr to just fail like that.  A more likely scenario is that the BDI  
is getting bad information.  Could you take a look at your IVORs?   
I'm very curious to see if fff81300 is an interrupt vector.

Andy