Thread (9 messages) flat view 9 messages, 3 authors, 2007-08-16

Re: System crash on boot_e500.S on 2.4Kernel

From: Becky Bruce <hidden>
Date: 2007-08-15 16:17:04

On Aug 15, 2007, at 8:59 AM, mike zheng wrote:
I use BDI to debug these two instructions. And here are the output  
of BDI just before the "rfi". The content of R6, R7 is different  
from SRR0(SPR26) and SRR1(SPR27).
I see you have not printed the pc/nia once you stop.  Are you sure  
you're stopped where you think?  Please check this.

-B
cds8548>res run

- TARGET: processing user reset request

- BDI asserts HRESET

- Reset JTAG controller passed

- JTAG exists check passed

- IDCODE is 0x0003901D

- SVR is 0x80390011

- PVR is 0x80210010

- CCSRBAR is 0x0_ff700000

- BDI removes HRESET

- TARGET: Target PVR is 0x80210010

- TARGET: resetting target passed

cds8548>halt

Target CPU : MPC85xx (e500v2 rev.1)

Target state : halted

Debug entry cause : COP halt

Current PC : 0xfff82560

Current CR : 0x88000042

Current MSR : 0x00021200

Current LR : 0xfff8aa4c

Current CCSRBAR : 0x0_e0000000

cds8548>ci

cds8548>bi 0x0000015c

Breakpoint identification is 0

cds8548>go

- TARGET: stopped

cds8548>rd

GPR00: 00000000 0ffabd20 00000200 00000008

GPR04: 00000000 00000001 00000020 00000160

GPR08: 1f8b0808 00000148 0ffabace 0ffe08b0

GPR12: 00000006 764deddb 10000300 007fff00

GPR16: 00000001 ffffffff 007fff25 0ffff9d8

GPR20: 007ffeb0 00000000 0fffaa3c 0ffae490

GPR24: 00000000 00000003 02000040 007fff25

GPR28: 007fff00 0ffab3b8 0fcd6000 007ffeb0

CR : 24024022 MSR: 00021200

cds8548>rdspr 26

SPR 26 : 0xfff81300 - 519424

cds8548>rdspr 27

SPR 27 : 0x00001000 4096

cds8548>






On 8/14/07, Andy Fleming [off-list ref] wrote:
On Aug 14, 2007, at 15:21, mike zheng wrote:
quoted
Hi All,

I am trying to bring up MPC8548 CDS board on 2.4 kernel. I have
problem in the head_e500.S. The "mtspr SRR0, r7; mtspr SRR1 r6"
does not work for me. The content of R7 and R6 are not moved to
SRR0 and SRR1.  I am using the tool-chain from Freescale for 2.6
kernel.

Any idea on this issue?
Just to check...how do you know it doesn't work?

Andy

_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help