+   l) RapidIO

"FSL PowerPC bridge RapidIO" or something like that -- you
aren't doing a _generic_ rapidio binding here.

+   RapidIO is a definition of a system interconnect. This node add
+   the support for RapidIO processor in kernel. The node name is
+   suggested to be 'rapidio'.
+
+   Required properties:
+
+    - compatible : Using "fsl,rapidio-delta" for Freescale PowerPC
+      RapidIO controller.
+    - #address-cells : Address representation for "rapidio" devices.
+      This field represents the number of cells needed to represent
+      the RapidIO address of the registers.
+      See 1) above for more details on defining #address-cells.
+    - reg : Offset and length of the register set for the device
+    - ranges : Should be defined as specified in 1) to describe the
+      translation of addresses for memory mapped RapidIO memory
+      space.
+    - interrupts : binding interrupts for this device node,
+      please follow below orders:
+      <err_irq bell_outb_irq bell_inb_irq msg1_tx_irq msg1_rx_irq
+      msg2_tx_irq msg2_rx_irq ... msgN_tx_irq msgN_rx_irq>.

_All_ of these are "as specified in 1)".  You should be saying
the specifics for your device here; for example, what register
blocks of your controller are described in "reg", and in what
order?


Segher