On Tue, Feb 14, 2006 at 12:20:35AM -0500, Ed Goforth wrote:

I am struggling with a problem and I hope someone can give me some
pointers.  We have a custom board with a 440gx.  I need to drive GPIO11
low.  The best as I can tell from the docs, I need to set bit 11 of the
TCR to 1 and bit 11 of the OR to 0 to do this.

Check that this pin is enabled as GPIO not as a function pin 
(SDR0_PFC0 register).

Also, just to be sure that you remapped GPIO registers correctly, use 
ioremap64 with full physical address (not just low 32 bits).

-- 
Eugene