Re: 8272ADS and Linux 2.6.12

Kumar,

Thanks for u'r reply. I tried it but it does not seem to work.

Here's my uboot info...
U-Boot 1.1.1 (Oct 29 2004 - 18:28:57)

MPC8272 Reset Status: External Soft, External Hard

MPC8272 Clock Configuration
 - Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq  25-75 , Core Freq 100-300
 - dfbrg 1, corecnf 0x0a, busdf 3, cpmdf 1, plldf 0, pllmf 3
 - vco_out  400000000, scc_clk  100000000, brg_clk   25000000
 - cpu_clk  400000000, cpm_clk  200000000, bus_clk  100000000
 - pci_clk   66666666

CPU:   MPC8272 (HiP7 Rev 13, Mask 0.0 0K50M) at 400 MHz
Board: Motorola MPC8272ADS
DRAM:  64 MB
Now running in RAM - U-Boot at: 03fc4000
FLASH:  8 MB
In:    serial
Out:   serial
Err:   serial
Net:   FCC1 ETHERNET
Hit any key to stop autoboot:  0=20





=3D> setenv bootargs console=3DttyCPM0,115200  root=3D/dev/ram
=3D> bootm fe600000
## Booting image at fe600000 ...
   Image Name:   2.6.12 for 8272
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    875845 Bytes =3D 855.3 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Hang here...

Anymore thots and pointers ?

Thanks!
ashutosh



On 7/14/05, Kumar Gala [off-list ref] wrote:

You may need to check the bootargs to insure that console=3DttyCPM0
=20
- kumar
=20
On Jul 14, 2005, at 1:55 AM, SIP COP 009 wrote:
=20

quoted

Hello,

We have a MPC8272 Eval Board which came with Linux 2.4 and U-boot. We
wanted to move to 2.6. I downloaded the latest 2.6.12 sources and
compiled the sources for this platform. The kernel is built, have run
the mkimage tool, but the kernel wont boot.  It just hangs after
decompressing the image.

Any ideas  ? Anything different that needs to be done for 2.6 ? Or any
known issues ?

Thanks!
ashutosh
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

=20