Re: How to remove JFFS2 'Making dirty' display on RPXlite DW?

David Woodhouse [off-list ref] wrote��

quoted

After unpacking SELF,I use the following command to create a jffs2
filesystem:

eraseall /dev/mtd3

mkfs.jffs2 -r /tmp/tmp -e 0x10000 -o image.jffs2 -b

Looks like you should have said '-e 256KiB' or '-e 0x40000' instead.

After taking your advice,the JFFS2 complaint
disappeared.The command I tested is as follows,it
worked fine:

eraseall /dev/mtd3

mkfs.jffs2 -r /tmp/tmp -e 0x40000 -o /dev/mtd3 -b

Thanks for you all.

Next,I will take Wolfgang's advice on decreasing boot
time to create an ext2+mini_fo filesystem based on MTD
 to get a faster boot process.By now the boot time of
my target is 18-20
seconds(48MHZ[CORE]+24MHZ[BUS]+uncompressed
kernel+JFFS2).

Best regards,

Sam

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/