Re: Lite5200 PCI not working

I've updated the table to include  the  settings  for  the  Rev.  4.0
board, too, and to list ALL jumpers on the board.

quoted

OK. Please see http://www.denx.de/twiki/bin/view/DULG/CoralPInstallation

Hope this helps.

I have Rev 3.0 board with analog switch type EL4331. To get it working
even in bypassed mode
it needs PD ( Power down ) input in pin 14 to grounded ( connect example
to pin 10 ).

With this modification my board works.  I am running Embedded QT but it
looks a like that
#define QT_QWS_REVERSE_BYTE_ENDIANNESS in
qt-embedded-free-3.3.2/src/kernel/qgfxraster_qws.cpp was not enough to get
colours right. Needs just more hacking code for fixing endianes problem.



Kate

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/