On Wed, May 19, 2004 at 04:42:28PM -0700, Eugene Surovegin wrote:
[snip]
quoted
mal0: Initialized, 4 tx channels, 2 rx channels
emac: IBM EMAC Ethernet driver, version 2.0
Maintained by Benjamin Herrenschmidt [off-list ref]
zmii0: input 0 in SMII mode
This is quite suspicious (SMII) ^^^^
quoted
eth0: IBM emac, MAC 00:04:ac:e3:23:b2
eth0: Found Generic MII PHY (0x08)
zmii0: input 1 in RMII mode
... and this (RMII) ^^^^
[snip]
Please, make sure you are using the latest linux-2.5-ocp or just latest
kernel.org's kernel (OCP stuff was just merged in).
Eugene
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/