Re: No Input from SMC1 on MPC860T - Resolved

Daris A Nevil wrote:

quoted

The key was to not enable the FRZ signal when setting up the timerbase;
apparently I was getting a spurious freeze signal which was turning off
my timer interrupts partway through.

If you are getting a "spurious freeze" signal, wouldn't you consider
something amiss with your hardware design or SIU/debug configuration?
If the timers are responding to a freeze condition, so is the rest
of the processor core, which isn't a good thing unless you are actively
debugging.

Please do not apply this patch, but rather find the cause of the real
problem since I prefer to freeze the timers while debugging.


	-- Dan


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/