Re: SCC or SMC for console ?

In message [ref] you wrote:

quoted

Should be no problem. The kernel on our FTP server was tested with  6
serial  ports  on  a  MPC860, with HW flow controll on all SCC's.

Reading arch/ppc/8xx_io/uart.c, I found out that all the flow control
related code was surrounded by false #if #endif. It seems that there is

You're reading the wrong code, it seems.

Get the sources from ftp://ftp.denx.de/pub/LinuxPPC/usr/src/
You will find a lot of CONFIG_UART_CTS_CONTROL_SCCx,
CONFIG_UART_RTS_CONTROL_SCCx, CONFIG_UART_CD_CONTROL_SCCx, and
CONFIG_UART_DTR_CONTROL_SCCx stuff there.

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
See us @ Embedded Systems Nuremberg, Feb 19-21, Hall 12 K01 (with TQ)

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/