[PATCH 3/4] ath11k: add caldata file for multiple radios
From: Jouni Malinen <hidden>
Date: 2021-07-21 20:20:21
Also in:
ath11k
Subsystem:
atheros ath generic utilities, qualcomm atheros ath11k wireless driver, the rest · Maintainers:
Jeff Johnson, Linus Torvalds
From: Anilkumar Kolli <redacted>
If multiple PCI cards are attached, each needs its own caldata file.
Added new Caldata file name,
PCI Bus:
cal-pci-0001:01:00.0.bin
cal-pci-0000:01:00.0.bin
AHB Bus:
cal-ahb-c000000.wifi1.bin
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1
Signed-off-by: Anilkumar Kolli <redacted>
Signed-off-by: Jouni Malinen <redacted>
---
drivers/net/wireless/ath/ath11k/qmi.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index a24a6647ba52..381ae70e45ff 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c@@ -2027,6 +2027,7 @@ static int ath11k_qmi_load_file_target_mem(struct ath11k_base *ab, static int ath11k_qmi_load_bdf_qmi(struct ath11k_base *ab) { + struct device *dev = ab->dev; char filename[ATH11K_QMI_MAX_BDF_FILE_NAME_SIZE]; const struct firmware *fw_entry; struct ath11k_board_data bd;
@@ -2061,6 +2062,14 @@ static int ath11k_qmi_load_bdf_qmi(struct ath11k_base *ab) goto out; file_type = ATH11K_QMI_FILE_TYPE_CALDATA; + + /* cal-<bus>-<id>.bin */ + snprintf(filename, sizeof(filename), "cal-%s-%s.bin", + ath11k_bus_str(ab->hif.bus), dev_name(dev)); + fw_entry = ath11k_core_firmware_request(ab, filename); + if (!IS_ERR(fw_entry)) + goto success; + fw_entry = ath11k_core_firmware_request(ab, ATH11K_DEFAULT_CAL_FILE); if (IS_ERR(fw_entry)) { ret = PTR_ERR(fw_entry);
@@ -2070,6 +2079,7 @@ static int ath11k_qmi_load_bdf_qmi(struct ath11k_base *ab) goto out; } +success: fw_size = min_t(u32, ab->hw_params.fw.board_size, fw_entry->size); ret = ath11k_qmi_load_file_target_mem(ab, fw_entry->data, fw_size, file_type); if (ret < 0) {
@@ -2077,8 +2087,7 @@ static int ath11k_qmi_load_bdf_qmi(struct ath11k_base *ab) goto out_qmi_cal; } - ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi caldata downloaded: type: %u\n", - file_type); + ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi caldata type: %u\n", file_type); out_qmi_cal: release_firmware(fw_entry);
--
2.25.1