[PATCH 3/3] ath11k: Align bss_chan_info structure with firmware
From: Jouni Malinen <hidden>
Date: 2021-07-20 21:50:05
Also in:
ath11k
Subsystem:
atheros ath generic utilities, qualcomm atheros ath11k wireless driver, the rest · Maintainers:
Jeff Johnson, Linus Torvalds
From: Seevalamuthu Mariappan <redacted> pdev_id in structure 'wmi_pdev_bss_chan_info_event' is wrongly placed at the beginning. This causes invalid values in survey dump. Hence, align the structure with the firmware. Note: The firmware releases follow this order since the feature was implemented. Also, it is not changing across the branches including QCA6390. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ritesh Singh <redacted> Signed-off-by: Seevalamuthu Mariappan <redacted> Signed-off-by: Jouni Malinen <redacted> --- drivers/net/wireless/ath/ath11k/wmi.c | 1 + drivers/net/wireless/ath/ath11k/wmi.h | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index a53783229520..e3d11a0a7b7c 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c@@ -1339,6 +1339,7 @@ int ath11k_wmi_pdev_bss_chan_info_request(struct ath11k *ar, WMI_TAG_PDEV_BSS_CHAN_INFO_REQUEST) | FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE); cmd->req_type = type; + cmd->pdev_id = ar->pdev->pdev_id; ath11k_dbg(ar->ab, ATH11K_DBG_WMI, "WMI bss chan info req type %d\n", type);
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 78849f0255fa..799b3bd96a27 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h@@ -2962,6 +2962,7 @@ struct wmi_pdev_bss_chan_info_req_cmd { u32 tlv_header; /* ref wmi_bss_chan_info_req_type */ u32 req_type; + u32 pdev_id; } __packed; struct wmi_ap_ps_peer_cmd {
@@ -4058,7 +4059,6 @@ struct wmi_vdev_stopped_event { } __packed; struct wmi_pdev_bss_chan_info_event { - u32 pdev_id; u32 freq; /* Units in MHz */ u32 noise_floor; /* units are dBm */ /* rx clear - how often the channel was unused */
@@ -4076,6 +4076,7 @@ struct wmi_pdev_bss_chan_info_event { /*rx_cycle cnt for my bss in 64bits format */ u32 rx_bss_cycle_count_low; u32 rx_bss_cycle_count_high; + u32 pdev_id; } __packed; #define WMI_VDEV_INSTALL_KEY_COMPL_STATUS_SUCCESS 0
--
2.25.1