[PATCH v4 08/10] wil6210: store FW RF calibration result
From: Maya Erez <hidden>
Date: 2017-08-03 19:08:43
Subsystem:
atheros ath generic utilities, the rest, wilocity wil6210 wireless driver · Maintainers:
Jeff Johnson, Linus Torvalds
From: Dedy Lansky <redacted> Store initial FW RF calibration result in driver. Set this calibration result back to FW after each FW reset in order to avoid future calibration procedures. Signed-off-by: Dedy Lansky <redacted> Signed-off-by: Maya Erez <redacted> --- drivers/net/wireless/ath/wil6210/main.c | 6 ++++++ drivers/net/wireless/ath/wil6210/wil6210.h | 6 ++++++ drivers/net/wireless/ath/wil6210/wmi.c | 5 +++++ drivers/net/wireless/ath/wil6210/wmi.h | 2 ++ 4 files changed, 19 insertions(+)
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index b1e2814..b89d017 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c@@ -1034,6 +1034,12 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw) wil_s(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, ICR), 0); wil_w(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, IMV), ~0); + if (wil->fw_calib_result > 0) { + __le32 val = cpu_to_le32(wil->fw_calib_result | + (CALIB_RESULT_SIGNATURE << 8)); + wil_w(wil, RGF_USER_FW_CALIB_RESULT, (u32 __force)val); + } + wil_release_cpu(wil); }
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 724ad59..e3c0c2f 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h@@ -171,6 +171,10 @@ struct RGF_ICR { #define RGF_USER_USER_SCRATCH_PAD (0x8802bc) #define RGF_USER_BL (0x880A3C) /* Boot Loader */ #define RGF_USER_FW_REV_ID (0x880a8c) /* chip revision */ +#define RGF_USER_FW_CALIB_RESULT (0x880a90) /* b0-7:result + * b8-15:signature + */ + #define CALIB_RESULT_SIGNATURE (0x11) #define RGF_USER_CLKS_CTL_0 (0x880abc) #define BIT_USER_CLKS_CAR_AHB_SW_SEL BIT(1) /* ref clk/PLL */ #define BIT_USER_CLKS_RST_PWGD BIT(11) /* reset on "power good" */
@@ -724,6 +728,8 @@ struct wil6210_priv { enum wmi_ps_profile_type ps_profile; + int fw_calib_result; + #ifdef CONFIG_PM #ifdef CONFIG_PM_SLEEP struct notifier_block pm_notify;
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index a9487f2..ffdd2fa 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c@@ -344,6 +344,11 @@ static void wmi_evt_ready(struct wil6210_priv *wil, int id, void *d, int len) strlcpy(wdev->wiphy->fw_version, wil->fw_version, sizeof(wdev->wiphy->fw_version)); + if (len > offsetof(struct wmi_ready_event, rfc_read_calib_result)) { + wil_dbg_wmi(wil, "rfc calibration result %d\n", + evt->rfc_read_calib_result); + wil->fw_calib_result = evt->rfc_read_calib_result; + } wil_set_recovery_state(wil, fw_recovery_idle); set_bit(wil_status_fwready, wil->status); /* let the reset sequence continue */
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index 4e31c2f..1b426d7 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h@@ -1300,6 +1300,8 @@ struct wmi_ready_event { /* enum wmi_phy_capability */ u8 phy_capability; u8 numof_additional_mids; + u8 rfc_read_calib_result; + u8 reserved[3]; } __packed; /* WMI_NOTIFY_REQ_DONE_EVENTID */
--
1.9.1