[PATCH 077/113] rtl8xxxu: Use REG_RFE_CTRL_ANTA_SRC rather than hard coded value
From: <hidden>
Date: 2016-02-29 22:05:57
Subsystem:
rtl8xxxu wireless driver (rtl8xxxu), the rest · Maintainers:
Jes Sorensen, Linus Torvalds
From: Jes Sorensen <redacted> Another case where we should use the register name rather than the hard coded value when accessing it. Signed-off-by: Jes Sorensen <redacted> --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index 25a8ca5b..18458db 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c@@ -2950,10 +2950,10 @@ static void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv) val32 |= (BIT(0) | BIT(1)); rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); - val32 = rtl8xxxu_read32(priv, 0x0930); + val32 = rtl8xxxu_read32(priv, REG_RFE_CTRL_ANTA_SRC); val32 &= 0xffffff00; val32 |= 0x77; - rtl8xxxu_write32(priv, 0x0930, val32); + rtl8xxxu_write32(priv, REG_RFE_CTRL_ANTA_SRC, val32); val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN;
--
2.5.0