[PATCH] brcmfmac: sdio: Increase the default timeouts a bit
From: Sjoerd Simons <hidden>
Date: 2016-01-25 10:47:40
Also in:
linux-rockchip, lkml, netdev
Subsystem:
broadcom brcm80211 ieee802.11 wireless drivers, the rest · Maintainers:
Arend van Spriel, Linus Torvalds
On a Radxa Rock2 board with a Ampak AP6335 (Broadcom 4339 core) it seems the card responds very quickly most of the time, unfortunately during initialisation it sometimes seems to take just a bit over 2 seconds to respond. This results intialization failing with message like: brcmf_c_preinit_dcmds: Retreiving cur_etheraddr failed, -52 brcmf_bus_start: failed: -52 brcmf_sdio_firmware_callback: dongle is not responding Increasing the timeout to allow for a bit more headroom allows the card to initialize reliably. A quick search online after diagnosing/fixing this showed that Google has a similar patch in their ChromeOS tree, so this doesn't seem specific to the board I'm using. Signed-off-by: Sjoerd Simons <redacted> --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index dd66143..75ac4bd 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c@@ -45,8 +45,8 @@ #include "chip.h" #include "firmware.h" -#define DCMD_RESP_TIMEOUT msecs_to_jiffies(2000) -#define CTL_DONE_TIMEOUT msecs_to_jiffies(2000) +#define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500) +#define CTL_DONE_TIMEOUT msecs_to_jiffies(2500) #ifdef DEBUG
--
2.7.0