On Fri, May 14, 2021 at 01:40:21PM +0200, Johan Hovold wrote:

On Thu, May 06, 2021 at 01:44:55PM +0100, Sean Young wrote:

quoted

The USB-UIRT device has its own driver, so blacklist the fdti driver
from using it if the driver has been enabled.

Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/usb/serial/ftdi_sio.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 542073d2f0dd..2320bda57796 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c

@@ -95,7 +95,9 @@ static int   ftdi_jtag_probe(struct usb_serial *serial);
 static int   ftdi_NDI_device_setup(struct usb_serial *serial);
 static int   ftdi_stmclite_probe(struct usb_serial *serial);
 static int   ftdi_8u2232c_probe(struct usb_serial *serial);
+#if !IS_ENABLED(CONFIG_IR_UIRT)
 static void  ftdi_USB_UIRT_setup(struct ftdi_private *priv);
+#endif
 static void  ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
 
 static const struct ftdi_sio_quirk ftdi_jtag_quirk = {

@@ -106,9 +108,11 @@ static const struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
 	.probe	= ftdi_NDI_device_setup,
 };
 
+#if !IS_ENABLED(CONFIG_IR_UIRT)
 static const struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {

Please use __maybe_unused instead of sprinkling ifdefs throughout the
driver.

Good point.

quoted

 	.port_probe = ftdi_USB_UIRT_setup,
 };
+#endif
 
 static const struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 	.port_probe = ftdi_HE_TIRA1_setup,

@@ -568,8 +572,10 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(OCT_VID, OCT_DK201_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
+#if !IS_ENABLED(CONFIG_IR_UIRT)
 	{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk },
+#endif

This would still be needed.

I agree having the quirk in place would be useful, but if vid/pid is listed
in the id_table then both uirt and ftdi_sio have the same vid/pid listed,
which is not a great idea. How can this work?

Thanks

quoted

 	{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
 	{ USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
 	{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },

@@ -2292,6 +2298,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	return 0;
 }
 
+#if !IS_ENABLED(CONFIG_IR_UIRT)
 /* Setup for the USB-UIRT device, which requires hardwired
  * baudrate (38400 gets mapped to 312500) */
 /* Called from usbserial:serial_probe */

@@ -2301,6 +2308,7 @@ static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
 	priv->custom_divisor = 77;
 	priv->force_baud = 38400;
 }
+#endif
 
 /* Setup for the HE-TIRA1 device, which requires hardwired
  * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled.  */

Johan