[PATCH 2/2] usb: dwc3: gadget: Fix dep->interval for fullspeed interrupt
From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Date: 2021-02-08 21:54:35
Also in:
stable
Subsystem:
designware usb3 drd ip driver, the rest, usb subsystem · Maintainers:
Thinh Nguyen, Linus Torvalds, Greg Kroah-Hartman
The dep->interval captures the number of frames/microframes per interval
from bInterval. Fullspeed interrupt endpoint bInterval is the number of
frames per interval and not 2^(bInterval - 1). So fix it here. This
change is only for debugging purpose and should not affect the interrupt
endpoint operation.
Cc: <redacted>
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
---
drivers/usb/dwc3/gadget.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index d0f8d3ec855f..aebcf8ec0716 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c@@ -615,8 +615,13 @@ static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action) if (dwc->gadget->speed == USB_SPEED_FULL) bInterval_m1 = 0; + if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT && + dwc->gadget->speed == USB_SPEED_FULL) + dep->interval = desc->bInterval; + else + dep->interval = 1 << (desc->bInterval - 1); + params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(bInterval_m1); - dep->interval = 1 << (desc->bInterval - 1); } return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETEPCONFIG, ¶ms);
--
2.28.0