[PATCH 1/2] usb: dwc3: gadget: Fix setting of DEPCFG.bInterval_m1
From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Date: 2021-02-08 21:54:32
Also in:
stable
Subsystem:
designware usb3 drd ip driver, the rest, usb subsystem · Maintainers:
Thinh Nguyen, Linus Torvalds, Greg Kroah-Hartman
Valid range for DEPCFG.bInterval_m1 is from 0 to 13, and it must be set
to 0 when the controller operates in full-speed. See the programming
guide for DEPCFG command section 3.2.2.1 (v3.30a).
Cc: <redacted>
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
---
drivers/usb/dwc3/gadget.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 97d707b4f384..d0f8d3ec855f 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c@@ -605,7 +605,17 @@ static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action) params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1); if (desc->bInterval) { - params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(desc->bInterval - 1); + u8 bInterval_m1; + + /* + * Valid range for DEPCFG.bInterval_m1 is from 0 to 13, and it + * must be set to 0 when the controller operates in full-speed. + */ + bInterval_m1 = min_t(u8, desc->bInterval - 1, 13); + if (dwc->gadget->speed == USB_SPEED_FULL) + bInterval_m1 = 0; + + params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(bInterval_m1); dep->interval = 1 << (desc->bInterval - 1); }
--
2.28.0