[PATCH v6 04/15] phy: tegra: xusb: tegra210: Do not reset UPHY PLL

Once UPHY PLL hardware power sequencer is enabled, do not assert
reset to PEX/SATA PLLs, otherwise UPHY PLL operation will be broken.
This commit removes reset_control_assert(pcie->rst) and
reset_control_assert(sata->rst) from PEX/SATA UPHY disable procedure.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
---
v6:
   no change
v5:
   no change
v4:
   no change
v3:
   new, was a part of "phy: tegra: xusb: Rearrange UPHY init on Tegra210"

 drivers/phy/tegra/xusb-tegra210.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 4dc9286ec1b8..9bfecdfecf35 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c

@@ -502,7 +502,6 @@ static void tegra210_pex_uphy_disable(struct tegra_xusb_padctl *padctl)
 	if (--pcie->enable > 0)
 		return;
 
-	reset_control_assert(pcie->rst);
 	clk_disable_unprepare(pcie->pll);
 }
 

@@ -739,7 +738,6 @@ static void tegra210_sata_uphy_disable(struct tegra_xusb_padctl *padctl)
 	if (--sata->enable > 0)
 		return;
 
-	reset_control_assert(sata->rst);
 	clk_disable_unprepare(sata->pll);
 }
 

-- 
2.25.1