On Fri, Jan 08, 2021 at 02:19:30AM +0000, Thinh Nguyen wrote:

Hi Wesley,

Felipe Balbi wrote:

quoted

Hi,

Wesley Cheng [off-list ref] writes:

quoted

+void composite_reset(struct usb_gadget *gadget)
+{
+	/*
+	 * Section 1.4.13 Standard Downstream Port of the USB battery charging
+	 * specification v1.2 states that a device connected on a SDP shall only
+	 * draw at max 100mA while in a connected, but unconfigured state.

The requirements are different, though. I think OTG spec has some extra
requirements where only 8mA can be drawn max. You need to check for the
otg flag. Moreover, USB3+ spec has units of 150mA meaning the device
can't draw 100mA (IIRC).

We see issue with this patch series. For our device running at SSP, the
device couldn't recover from a port reset and remained in eSS.Inactive
state.

This patch series is already in Greg's usb-testing. Please review and
help fix it.

Should I just revert this?  I'll be glad to drop it.

thanks,

greg k-h