[PATCH v3 34/38] arm64: dts: tegra210: Add sdmmc pad auto calibration offsets
STALE2953d
REVIEWED: 1 (0M)
From: Aapo Vienamo <hidden>
Date: 2018-08-30 15:08:35
Also in:
linux-devicetree, linux-mmc, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Revision v3 of 3 in this series; 1 review trailer.
Revisions (3)
- v1 [diff vs current]
- v2 [diff vs current]
- v3 current
Add the calibration offset properties used for automatic pad drive strength calibration. Signed-off-by: Aapo Vienamo <redacted> Acked-by: Thierry Reding <redacted> --- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index bc1918e07cc3..2a80f2bd80e5 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi@@ -1051,6 +1051,10 @@ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; pinctrl-0 = <&sdmmc1_3v3>; pinctrl-1 = <&sdmmc1_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>; + nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; status = "disabled"; };
@@ -1062,6 +1066,8 @@ clock-names = "sdhci"; resets = <&tegra_car 9>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>; status = "disabled"; };
@@ -1076,6 +1082,10 @@ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; pinctrl-0 = <&sdmmc3_3v3>; pinctrl-1 = <&sdmmc3_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>; + nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; status = "disabled"; };
@@ -1087,6 +1097,8 @@ clock-names = "sdhci"; resets = <&tegra_car 15>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>; status = "disabled"; };
--
2.18.0