Re: [PATCH 35/35] tty: make use of tty_get_byte_size
From: Johan Hovold <johan@kernel.org>
Date: 2021-05-10 09:59:58
Also in:
lkml
On Wed, May 05, 2021 at 11:19:28AM +0200, Jiri Slaby wrote:
In the previous patch, we introduced tty_get_byte_size for computing byte size. Here, we make use of it in various tty drivers. The stats look nice: 16 insertions, 203 deletions. Signed-off-by: Jiri Slaby <redacted> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Lin <dtwlin@gmail.com> Cc: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <redacted> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Oliver Neukum <oneukum@suse.com> --- drivers/char/pcmcia/synclink_cs.c | 8 +----- drivers/staging/greybus/uart.c | 16 +---------- drivers/tty/serial/cpm_uart/cpm_uart_core.c | 19 +----------- drivers/tty/serial/mxs-auart.c | 18 +----------- drivers/tty/serial/qcom_geni_serial.c | 16 +---------- drivers/tty/serial/sh-sci.c | 20 +------------ drivers/tty/serial/stm32-usart.c | 32 +-------------------- drivers/tty/synclink_gt.c | 9 +----- drivers/usb/class/cdc-acm.c | 17 ++--------- drivers/usb/serial/belkin_sa.c | 21 ++------------ drivers/usb/serial/cypress_m8.c | 19 ++---------- drivers/usb/serial/pl2303.c | 15 +--------- drivers/usb/serial/whiteheat.c | 9 +----- 13 files changed, 16 insertions(+), 203 deletions(-)
quoted hunk ↗ jump to hunk
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index f414d6acad69..a5cbd7324268 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c@@ -971,23 +971,7 @@ static void mxs_auart_settermios(struct uart_port *u, ctrl2 = mxs_read(s, REG_CTRL2); /* byte size */ - switch (cflag & CSIZE) { - case CS5: - bm = 0; - break; - case CS6: - bm = 1; - break; - case CS7: - bm = 2; - break; - case CS8: - bm = 3; - break; - default: - return; - } - + bm = tty_get_byte_size(cflag, false) - 5;
This looks weird. The 0..3 constants are really "magic constants" representing the different word sizes. Subtracting an offset obfuscates this. Perhaps better left unchanged or add an appropriately names define for the offset to make it clear what is going on here.
quoted hunk ↗ jump to hunk
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 1dca04e1519d..b135ed1ee512 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c@@ -887,23 +887,8 @@ static void cypress_set_termios(struct tty_struct *tty, } else parity_enable = parity_type = 0; - switch (cflag & CSIZE) { - case CS5: - data_bits = 0; - break; - case CS6: - data_bits = 1; - break; - case CS7: - data_bits = 2; - break; - case CS8: - data_bits = 3; - break; - default: - dev_err(dev, "%s - CSIZE was set, but not CS5-CS8\n", __func__); - data_bits = 3; - } + data_bits = tty_get_byte_size(cflag, false) - 5; +
Same here.
quoted hunk ↗ jump to hunk
spin_lock_irqsave(&priv->lock, flags); oldlines = priv->line_control; if ((cflag & CBAUD) == B0) {diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index fd773d252691..76e4d90a9d43 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c@@ -788,20 +788,7 @@ static void pl2303_set_termios(struct tty_struct *tty, pl2303_get_line_request(port, buf); - switch (C_CSIZE(tty)) { - case CS5: - buf[6] = 5; - break; - case CS6: - buf[6] = 6; - break; - case CS7: - buf[6] = 7; - break; - default: - case CS8: - buf[6] = 8; - } + buf[6] = tty_get_byte_size(C_CSIZE(tty), false);
Passing tty->termios would be better, but either way no need to mask off the non CSIZE bits here. Johan