[PATCH v3 10/12] OMAP: Serial: Use resume call from prcm to enable uart
From: Govindraj.R <hidden>
Date: 2011-06-08 11:23:12
Also in:
linux-arm-kernel, linux-omap
Subsystem:
arm port, omap power management support, omap2+ support, the rest, tty layer and serial drivers · Maintainers:
Russell King, Kevin Hilman, Aaro Koskinen, Andreas Kemnade, Roger Quadros, Tony Lindgren, Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
Use resume idle call from prcm_irq to enable uart_port from low power states. Add api to check pad wakeup status which will we used from uart_resume func. to enable back uart port if a wakeup event occurred. UART_Resume func. can be removed once we have irq_chaining functionality available. Signed-off-by: Govindraj.R <redacted> --- arch/arm/mach-omap2/pm24xx.c | 2 ++ arch/arm/mach-omap2/pm34xx.c | 2 ++ arch/arm/mach-omap2/serial.c | 23 +++++++++++++++++++++++ arch/arm/plat-omap/include/plat/omap-serial.h | 2 ++ arch/arm/plat-omap/include/plat/serial.h | 1 + drivers/tty/serial/omap-serial.c | 23 +++++++++++++++++++++++ 6 files changed, 53 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index c405bda..ba58a1d 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c@@ -137,6 +137,8 @@ static void omap2_enter_full_retention(void) OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL), OMAP_SDRC_REGADDR(SDRC_POWER)); + omap_uart_resume_idle(); + no_sleep: if (omap2_pm_debug) { unsigned long long tmp;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index ac7b7f8..3997e92 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c@@ -216,6 +216,8 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs) wkst = omap2_prm_read_mod_reg(module, wkst_off); wkst &= omap2_prm_read_mod_reg(module, grpsel_off); + + c += omap_uart_resume_idle(); if (wkst) { iclk = omap2_cm_read_mod_reg(module, iclk_off); fclk = omap2_cm_read_mod_reg(module, fclk_off);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 6ac078f..4bc5914 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c@@ -199,6 +199,28 @@ static void omap_serial_fill_default_pads(struct omap_board_data *bdata) } } +/* TBD: Will be removed once we have irq-chaing mechanism */ +static bool omap_uart_chk_wakeup(struct platform_device *pdev) +{ + struct omap_uart_port_info *up = pdev->dev.platform_data; + struct omap_device *od; + u32 wkst = 0; + bool ret = false; + + od = to_omap_device(pdev); + if (omap_hmwod_pad_get_wakeup_status(od->hwmods[0])) + ret = true; + + /* Check for normal UART wakeup (and clear it) */ + wkst = __raw_readl(up->wk_st) & up->wk_mask; + if (wkst) { + __raw_writel(wkst, up->wk_st); + ret = true; + } + + return ret; +} + static void omap_uart_wakeup_enable(struct platform_device *pdev, bool enable) { struct omap_uart_port_info *up = pdev->dev.platform_data;
@@ -369,6 +391,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, pdata->uartclk = OMAP24XX_BASE_BAUD * 16; pdata->flags = UPF_BOOT_AUTOCONF; pdata->enable_wakeup = omap_uart_wakeup_enable; + pdata->chk_wakeup = omap_uart_chk_wakeup; pdata->dma_enabled = info->dma_enabled; pdata->dma_rx_buf_size = info->dma_rx_buf_size; pdata->dma_rx_poll_rate = info->dma_rx_poll_rate;
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index c5f4dd9..b5117bd 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h@@ -75,6 +75,7 @@ struct omap_uart_port_info { unsigned int auto_sus_timeout; /* Auto_suspend timeout */ void (*enable_wakeup)(struct platform_device *, bool); + bool (*chk_wakeup)(struct platform_device *); void __iomem *wk_st; void __iomem *wk_en; u32 wk_mask;
@@ -132,6 +133,7 @@ struct uart_omap_port { unsigned long port_activity; unsigned int errata; void (*enable_wakeup)(struct platform_device *, bool); + bool (*chk_wakeup)(struct platform_device *); }; #endif /* __OMAP_SERIAL_H__ */
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index ee758d4..44a42aa 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h@@ -109,6 +109,7 @@ extern void omap_serial_init(void); extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); extern void omap_serial_init_port(struct omap_board_data *bdata, struct omap_uart_port_info *platform_data); +extern u32 omap_uart_resume_idle(void); #endif #endif
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 307b7c6..c3561dd 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c@@ -43,6 +43,7 @@ #include <plat/dmtimer.h> #include <plat/omap-serial.h> #include <plat/omap_device.h> +#include <plat/serial.h> static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
@@ -108,6 +109,27 @@ static inline void serial_omap_port_enable(struct uart_omap_port *up) pm_runtime_get_sync(&up->pdev->dev); } +/* TBD: Should be removed once we irq-chaining mechanism in place */ +u32 omap_uart_resume_idle() +{ + int i; + u32 ret = 0; + + for (i = 0; i < OMAP_MAX_HSUART_PORTS; i++) { + struct uart_omap_port *up = ui[i]; + + if (!up) + continue; + + if (up->chk_wakeup(up->pdev)) { + serial_omap_port_enable(up); + serial_omap_port_disable(up); + ret++; + } + } + return ret; +} + static void serial_omap_stop_rxdma(struct uart_omap_port *up) { if (up->uart_dma.rx_dma_used) {
@@ -1392,6 +1414,7 @@ static int serial_omap_probe(struct platform_device *pdev) up->uart_dma.uart_base = mem->start; up->errata = omap_up_info->errata; up->enable_wakeup = omap_up_info->enable_wakeup; + up->chk_wakeup = omap_up_info->chk_wakeup; if (omap_up_info->dma_enabled) { up->uart_dma.uart_dma_tx = dma_tx->start;
--
1.7.0.4