Hello Richard,

On 17.03.21 00:10, Richard Weinberger wrote:

On Tue, Mar 16, 2021 at 6:24 PM Ahmad Fatoum [off-list ref] wrote:

quoted

This series has been tested with dmcrypt[5] on an i.MX6DL.

Do have this series also in a git repo to pull from?
I'd like to give it a test on various systems.

Yes, please pull git://git.pengutronix.de/afa/linux
Branch v5.12/topic/trusted-source-caam

It includes these three patches on top of Jarkko's linux-tpmdd/master.

quoted

Looking forward to your feedback.

Thanks for working on this! David and I will have a closer look these days.

Great. Here is a simple testing regiment that could help you getting started:

# First boot
    DEV=/dev/loop0
    ALGO=aes-cbc-essiv:sha256
    KEYNAME=kmk
    BLOCKS=20

    mount -o remount,rw /
    fallocate -l $((BLOCKS*512)) ~/loop0.img
    losetup -P $DEV ~/loop0.img
    KEY="$(keyctl add trusted $KEYNAME 'new 32' @s)"
    keyctl pipe $KEY >~/kmk.blob

    TABLE="0 $BLOCKS crypt $ALGO :32:trusted:$KEYNAME 0 $DEV 0 1 allow_discards"
    echo $TABLE | dmsetup create mydev
    echo $TABLE | dmsetup load mydev
    dd if=/dev/zero of=/dev/mapper/mydev || true
    echo "It works!" 1<> /dev/mapper/mydev
    cryptsetup close mydev

# Second boot
    DEV=/dev/loop0
    ALGO=aes-cbc-essiv:sha256
    KEYNAME=kmk
    BLOCKS=20

    losetup -P $DEV ~/loop0.img
    keyctl add trusted $KEYNAME "load $(cat ~/kmk.blob)" @s
    TABLE="0 $BLOCKS crypt $ALGO :32:trusted:$KEYNAME 0 $DEV 0 1 allow_discards"
    echo $TABLE | dmsetup create mydev
    echo $TABLE | dmsetup load mydev

# Should print that It works!
    hexdump -C /dev/mapper/mydev

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |