Re: [PATCH v33 11/21] x86/sgx: Linux Enclave Driver

On Fri, Jun 26, 2020 at 11:14:19AM +0200, Borislav Petkov wrote:

On Thu, Jun 18, 2020 at 01:08:33AM +0300, Jarkko Sakkinen wrote:

quoted

+static int sgx_encl_create(struct sgx_encl *encl, struct sgx_secs *secs)
+{
+	unsigned long encl_size = secs->size + PAGE_SIZE;

Wait, you just copied @secs from user memory in sgx_ioc_enclave_create()
and now use ->size unverified? You're kidding, right?

The size of the enclave is checked in sgx_validate_secs() before it is used
to configure the shmem backing.
 

quoted

+	struct sgx_epc_page *secs_epc;
+	unsigned long ssaframesize;
+	struct sgx_pageinfo pginfo;
+	struct sgx_secinfo secinfo;
+	struct file *backing;
+	long ret;
+
+	if (atomic_read(&encl->flags) & SGX_ENCL_CREATED)
+		return -EINVAL;
+
+	ssaframesize = sgx_calc_ssaframesize(secs->miscselect, secs->xfrm);

So this is using more un-validated user input to do further calculations.
What can possibly go wrong?

ssaframesize is also validated below, and the computations on miscselect and
xfm in sgx_calc_ssaframesize() are bounded such that bad input won't send
the kernel into the weeds.

That being said, I agree that it would be safer to move sgx_calc_ssaframesize()
inside sgx_validate_secs() and only compute encl_size after the secs is
validated.

I sure hope *I* am wrong and am missing something here.

If not, please, for the next version, audit all your user input and
validate it before using it. Srsly.

quoted

+	if (sgx_validate_secs(secs, ssaframesize)) {
+		pr_debug("invalid SECS\n");
+		return -EINVAL;
+	}
+
+	backing = shmem_file_setup("SGX backing", encl_size + (encl_size >> 5),
+				   VM_NORESERVE);
+	if (IS_ERR(backing))
+		return PTR_ERR(backing);
+
+	encl->backing = backing;
+
+	secs_epc = __sgx_alloc_epc_page();
+	if (IS_ERR(secs_epc)) {
+		ret = PTR_ERR(secs_epc);
+		goto err_out_backing;
+	}
+
+	encl->secs.epc_page = secs_epc;
+
+	pginfo.addr = 0;
+	pginfo.contents = (unsigned long)secs;
+	pginfo.metadata = (unsigned long)&secinfo;
+	pginfo.secs = 0;
+	memset(&secinfo, 0, sizeof(secinfo));
+
+	ret = __ecreate((void *)&pginfo, sgx_get_epc_addr(secs_epc));
+	if (ret) {
+		pr_debug("ECREATE returned %ld\n", ret);
+		goto err_out;
+	}
+
+	if (secs->attributes & SGX_ATTR_DEBUG)
+		atomic_or(SGX_ENCL_DEBUG, &encl->flags);
+
+	encl->secs.encl = encl;
+	encl->secs_attributes = secs->attributes;
+	encl->allowed_attributes |= SGX_ATTR_ALLOWED_MASK;
+	encl->base = secs->base;
+	encl->size = secs->size;
+	encl->ssaframesize = secs->ssa_frame_size;
+
+	/*
+	 * Set SGX_ENCL_CREATED only after the enclave is fully prepped.  This
+	 * allows setting and checking enclave creation without having to take
+	 * encl->lock.
+	 */
+	atomic_or(SGX_ENCL_CREATED, &encl->flags);
+
+	return 0;
+
+err_out:
+	sgx_free_epc_page(encl->secs.epc_page);
+	encl->secs.epc_page = NULL;
+
+err_out_backing:
+	fput(encl->backing);
+	encl->backing = NULL;
+
+	return ret;
+}
+
+/**
+ * sgx_ioc_enclave_create - handler for %SGX_IOC_ENCLAVE_CREATE
+ * @filep:	open file to /dev/sgx

That's

@encl: enclave pointer

or so.

quoted

+ * @arg:	userspace pointer to a struct sgx_enclave_create instance
+ *
+ * Allocate kernel data structures for a new enclave and execute ECREATE after
+ * verifying the correctness of the provided SECS.
+ *
+ * Note, enforcement of restricted and disallowed attributes is deferred until
+ * sgx_ioc_enclave_init(), only the architectural correctness of the SECS is
+ * checked by sgx_ioc_enclave_create().

Well, I don't see that checking. Where is it?

quoted

+ *
+ * Return:
+ *   0 on success,
+ *   -errno otherwise
+ */
+static long sgx_ioc_enclave_create(struct sgx_encl *encl, void __user *arg)
+{
+	struct sgx_enclave_create ecreate;
+	struct page *secs_page;
+	struct sgx_secs *secs;
+	int ret;
+
+	if (copy_from_user(&ecreate, arg, sizeof(ecreate)))
+		return -EFAULT;
+
+	secs_page = alloc_page(GFP_KERNEL);
+	if (!secs_page)
+		return -ENOMEM;
+
+	secs = kmap(secs_page);
+	if (copy_from_user(secs, (void __user *)ecreate.src, sizeof(*secs))) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	ret = sgx_encl_create(encl, secs);
+
+out:
+	kunmap(secs_page);
+	__free_page(secs_page);
+	return ret;
+}

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette