[smartpqi updates PATCH 1/9] smartpqi: add pci id for H3C controller
From: Don Brace <don.brace@microchip.com>
Date: 2021-07-06 18:16:25
Also in:
lkml
Subsystem:
microsemi smart array smartpqi driver (smartpqi), scsi subsystem, the rest · Maintainers:
Don Brace, "James E.J. Bottomley", "Martin K. Petersen", Linus Torvalds
From: Mahesh Rajashekhara <redacted>
Add support for H3C P4408-Ma-8i-2GB device ID
VID_9005, DID_028F, SVID_193D and SDID_1108
Reviewed-by: Kevin Barnett <redacted>
Reviewed-by: Mike McGowen <redacted>
Reviewed-by: Murthy Bhat <redacted>
Reviewed-by: Scott Benesh <redacted>
Reviewed-by: Scott Teel <redacted>
Signed-off-by: Mahesh Rajashekhara <redacted>
Signed-off-by: Don Brace <don.brace@microchip.com>
---
drivers/scsi/smartpqi/smartpqi_init.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index dcc0b9618a64..d977c7b30d5c 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c@@ -8711,6 +8711,10 @@ static const struct pci_device_id pqi_pci_id_table[] = { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, 0x193d, 0x1107) }, + { + PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, + 0x193d, 0x1108) + }, { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, 0x193d, 0x8460)
--
2.28.0.rc1.9.ge7ae437ac1