On Wednesday 13 January 2016 06:39 PM, Mark Brown wrote:

* PGP Signed by an unknown key

On Wed, Jan 13, 2016 at 06:07:51PM +0530, Laxman Dewangan wrote:

quoted

On Wednesday 13 January 2016 06:01 PM, Mark Brown wrote:

quoted

What is FPS_SRC and why is it set from init_data?  A driver should never
be looking at init_data.

When FPS_SRC is set to NONE (this is needed from platform data) then based
on constraint like boot enable/always enable, it need to be on desired
state. Otherwise we may endup with disabling the rail when setting to NONE
and create issue.

What is "it" and why can't we check what the current configuration is
while setting FPS to NONE?

I will have platform specific data in callback of enable/disable only.
Which call back do I need to set this? enable/disable or post register?

quoted

I need to set the FPS src properly for each rails before callback happen
from regulator init so that enable/disable/is_enable can handle it properly.

Why not just reorder the callback so it happens before the constraints
are applied?

which callback I need to reorder for getting the context for configruation?




-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.