Thread (18 messages) 18 messages, 3 authors, 2020-06-09

Re: [PATCH RT 1/2] tasklet: Address a race resulting in double-enqueue

From: Ramon Fried <hidden>
Date: 2020-06-04 16:04:29
Also in: lkml

On Thu, Apr 23, 2020 at 11:55 PM [off-list ref] wrote:
quoted hunk ↗ jump to hunk
From: Zhang Xiao <redacted>

v4.19.115-rt49-rc1 stable review patch.
If anyone has any objections, please let me know.

-----------


The kernel bugzilla has the following race condition reported:

CPU0                    CPU1            CPU2
------------------------------------------------
test_set SCHED
 test_set RUN
   if SCHED
    add_list
    raise
    clear RUN
<softirq>
test_set RUN
test_clear SCHED
 ->func
                        test_set SCHED
tasklet_try_unlock ->0
test_clear SCHED
                                        test_set SCHED
 ->func
tasklet_try_unlock ->1
                                        test_set RUN
                                        if SCHED
                                        add list
                                        raise
                                        clear RUN
                        test_set RUN
                        if SCHED
                         add list
                         raise
                         clear RUN

As a result the tasklet is enqueued on both CPUs and run on both CPUs. Due
to the nature of the list used here, it is possible that further
(different) tasklets, which are enqueued after this double-enqueued
tasklet, are scheduled on CPU2 but invoked on CPU1. It is also possible
that these tasklets won't be invoked at all, because during the second
enqueue process the t->next pointer is set to NULL - dropping everything
from the list.

This race will trigger one or two of the WARN_ON() in
tasklet_action_common().
The problem is that the tasklet may be invoked multiple times and clear
SCHED bit on each invocation. This makes it possible to enqueue the
very same tasklet on different CPUs.

Current RT-devel is using the upstream implementation which does not
re-run tasklets if they have SCHED set again and so it does not clear
the SCHED bit multiple times on a single invocation.

Introduce the CHAINED flag. The tasklet will only be enqueued if the
CHAINED flag has been set successfully.
If it is possible to exchange the flags (CHAINED | RUN) -> 0 then the
tasklet won't be re-run. Otherwise the possible SCHED flag is removed
and the tasklet is re-run again.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=61451
Not-signed-off-by: Zhang Xiao [off-list ref]
[bigeasy: patch description]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

Signed-off-by: Tom Zanussi <zanussi@kernel.org>
---
 include/linux/interrupt.h | 5 ++++-
 kernel/softirq.c          | 6 +++++-
 2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 97d9ba26915e..a3b5edb26bc5 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -579,12 +579,15 @@ enum
 {
        TASKLET_STATE_SCHED,    /* Tasklet is scheduled for execution */
        TASKLET_STATE_RUN,      /* Tasklet is running (SMP only) */
-       TASKLET_STATE_PENDING   /* Tasklet is pending */
+       TASKLET_STATE_PENDING,  /* Tasklet is pending */
+       TASKLET_STATE_CHAINED   /* Tasklet is chained */
 };

 #define TASKLET_STATEF_SCHED   (1 << TASKLET_STATE_SCHED)
 #define TASKLET_STATEF_RUN     (1 << TASKLET_STATE_RUN)
 #define TASKLET_STATEF_PENDING (1 << TASKLET_STATE_PENDING)
+#define TASKLET_STATEF_CHAINED (1 << TASKLET_STATE_CHAINED)
+#define TASKLET_STATEF_RC      (TASKLET_STATEF_RUN | TASKLET_STATEF_CHAINED)

 #if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT_FULL)
 static inline int tasklet_trylock(struct tasklet_struct *t)
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 25bcf2f2714b..73dae64bfc9c 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -947,6 +947,10 @@ static void __tasklet_schedule_common(struct tasklet_struct *t,
         * is locked before adding it to the list.
         */
        if (test_bit(TASKLET_STATE_SCHED, &t->state)) {
+               if (test_and_set_bit(TASKLET_STATE_CHAINED, &t->state)) {
+                       tasklet_unlock(t);
+                       return;
+               }
                t->next = NULL;
                *head->tail = t;
                head->tail = &(t->next);
@@ -1040,7 +1044,7 @@ static void tasklet_action_common(struct softirq_action *a,
 again:
                t->func(t->data);

-               while (!tasklet_tryunlock(t)) {
+               while (cmpxchg(&t->state, TASKLET_STATEF_RC, 0) != TASKLET_STATEF_RC) {
                        /*
                         * If it got disabled meanwhile, bail out:
                         */
--
2.17.1
Hi, This patch introduced a regression in our kernel
(v4.19.124-rt53-rebase), It occurs when we're jumping to crush kernel
using kexec, in the initialization of the emmc driver.
I'm still debugging the root cause, but I thought of mentioning this
in the mailing list if you have any idea why this could occur.
The issue doesn't happen on normal boot, only when I specifically
crash the kernel into the crash kernel.
Thanks,
Ramon.

[    0.546142] macb 2b00000.eth1 eth1: Cadence GEM rev 0x00070200 at
0x02b00000 irq 16 (00:28:f8:b7:a0:40)
[    0.548041] sdhci: Secure Digital Host Controller Interface driver
[    0.548042] sdhci: Copyright(c) Pierre Ossman
[    0.548044] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.580588] mmc0: SDHCI controller on 2200000.sdhci [2200000.sdhci]
using ADMA 64-bit
[    0.605753] hm, tasklet state: 00000008
[    0.605757] ------------[ cut here ]------------
[    0.605763] WARNING: CPU: 0 PID: 1 at ../kernel/softirq.c:1061
0xa80000080282649c
[    0.605771] CPU: 0 PID: 1 Comm: swapper Not tainted
4.19.124.eyeq5_ssnt-local-rt53-07819-g3519e8cf4110 #4
[    0.605774] Stack : 0000000000000000 0000000000000018
a80000080340bd40 0000000002d40000
[    0.605780]         a80000080340be70 0000000000000000
0000000000000000 000000000000007e
[    0.605785]         0000000000000000 0000000000000001
0000000000000001 0000000002d30000
[    0.605790]         0000000000000000 a800000802b2a688
0000000002d30000 0000000002d30000
[    0.605795]         0000000000000000 0000000000000000
a80000080282649c a800000802b6cf28
[    0.605799]         0000000000000009 0000000000000425
0000000000000000 0000000000000007
[    0.605804]         0000000002d30000 0000000002d30000
0000000000000000 a800000802d20000
[    0.605809]         a800000803430000 a80000080340bd40
a800000802d284c0 a80000080280a6c4
[    0.605813]         0000000000000000 0000000000000000
0000000000000000 0000000000000000
[    0.605818]         0000000000000000 a80000080280a6c8
0000000000000000 a800000802823b0c
[    0.605823]         ...
[    0.605825] Call Trace:
[    0.605830] [<a800000802b2a688>] 0xa800000802b2a688
[    0.605833] [<a80000080282649c>] 0xa80000080282649c
[    0.605835] [<a80000080280a6c4>] 0xa80000080280a6c4
[    0.605838] [<a80000080280a6c8>] 0xa80000080280a6c8
[    0.605840] [<a800000802823b0c>] 0xa800000802823b0c
[    0.605842] [<a80000080282649c>] 0xa80000080282649c
[    0.605845] [<a800000802b30394>] 0xa800000802b30394
[    0.605847] [<a8000008029cd2ec>] 0xa8000008029cd2ec
[    0.605850] [<a800000802805490>] 0xa800000802805490
[    0.605851]
[    0.605854] ---[ end trace 293afee709e91e0b ]---
[    0.607548] stn8500_serial 800000.uart: detected port #0
[    0.607576] stn8500_serial 800000.uart: uartclk 125000000
[    0.607605] 800000.uart: ttyST0 at MMIO 0x800000 (irq = 46,
base_baud = 7812500) is a stn8500
[    0.610303] stn8500_serial 900000.uart: detected port #1
[    0.610324] stn8500_serial 900000.uart: uartclk 125000000
[    0.611564] 900000.uart: ttyST1 at MMIO 0x900000 (irq = 46,
base_baud = 7812500) is a stn8500
[    0.614645] stn8500_serial a00000.uart: detected port #2
[    0.614891] stn8500_serial a00000.uart: uartclk 125000000
[    0.614919] a00000.uart: ttyST2 at MMIO 0xa00000 (irq = 46,
base_baud = 7812500) is a stn8500
[    0.614930] stn8500_serial a00000.uart: console setup on port #2 :
uartclk 125000000 115207-n-8-n
[    0.615943] console [ttyST2] enabled
[    0.615945] bootconsole [stn8500] disabled
[    0.620959] Freeing unused kernel memory: 1324K
[    0.620965] This architecture does not have kernel memory protection.
[    0.620967] Run /init as init process
[    0.710641] random: dd: uninitialized urandom read (512 bytes read)
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help