Re: [net-next,v2,7/9] net: use core MTU range checking in misc drivers

From
Sven Eckelmann <hidden>
Date
2016-10-22 07:25:56
Also in
lkml, netdev
Reply to
Jarod Wilson, 2016-10-20
On Donnerstag, 20. Oktober 2016 13:55:22 CEST Jarod Wilson wrote:
[...]
batman-adv:
- set max_mtu
- remove batadv_interface_change_mtu
- initialization is a little async, not 100% certain that max_mtu is set
  in the optimal place, don't have hardware to test with
batman-adv is creating a virtual interface - so there are no
hardware requirements (ok, ethernet compatible hardware - even
when only virtual/emulated).

[...]
quoted hunk ↗ jump to hunk
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index 49e16b6..112679d 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -158,17 +158,6 @@ static int batadv_interface_set_mac_addr(struct net_device *dev, void *p)
 	return 0;
 }
 
-static int batadv_interface_change_mtu(struct net_device *dev, int new_mtu)
-{
-	/* check ranges */
-	if ((new_mtu < 68) || (new_mtu > batadv_hardif_min_mtu(dev)))
-		return -EINVAL;
-
-	dev->mtu = new_mtu;
-
-	return 0;
-}
-
 /**
  * batadv_interface_set_rx_mode - set the rx mode of a device
  * @dev: registered network device to modify
@@ -920,7 +909,6 @@ static const struct net_device_ops batadv_netdev_ops = {
 	.ndo_vlan_rx_add_vid = batadv_interface_add_vid,
 	.ndo_vlan_rx_kill_vid = batadv_interface_kill_vid,
 	.ndo_set_mac_address = batadv_interface_set_mac_addr,
-	.ndo_change_mtu = batadv_interface_change_mtu,
 	.ndo_set_rx_mode = batadv_interface_set_rx_mode,
 	.ndo_start_xmit = batadv_interface_tx,
 	.ndo_validate_addr = eth_validate_addr,
@@ -987,6 +975,7 @@ struct net_device *batadv_softif_create(struct net *net, const char *name)
 	dev_net_set(soft_iface, net);
 
 	soft_iface->rtnl_link_ops = &batadv_link_ops;
+	soft_iface->max_mtu = batadv_hardif_min_mtu(soft_iface);
 
 	ret = register_netdevice(soft_iface);
 	if (ret < 0) {
This looks bogus to me. You are now setting max_mtu during initialization of
the virtual interface. But at this time no slave interfaces were added to the
master batman-adv interface. So the batadv_hardif_min_mtu will not return the
correct value here. Especially if you don't have fragmentation enabled.

So this change looks like a bug to me

Kind regards,
	Sven

Attachments

Thread (5 messages) 5 messages, 5 authors, last reply 2016-10-22
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help