Thread (37 messages) 37 messages, 3 authors, 2013-02-21

Re: Brocken Raid & LUKS

From: Stone <hidden>
Date: 2013-02-21 17:17:41

Am 21.02.2013 17:54, schrieb Phil Turmel:
On 02/21/2013 11:51 AM, Stone wrote:
quoted
the dead-key was pressed
here the output:
root@bender:~# dd if=/dev/zero bs=1024 count=12 seek=1073006628
of=/dev/sdc1
12+0 records in
12+0 records out
12288 bytes (12 kB) copied, 0,00019109 s, 64,3 MB/s
root@bender:~# dd if=/dev/zero bs=1024 count=12 seek=1073101016
of=/dev/sdc1
12+0 records in
12+0 records out
12288 bytes (12 kB) copied, 0,00017799 s, 69,0 MB/s
root@bender:~# dd if=/dev/zero bs=1024 count=8 seek=1335739456 of=/dev/sdc1
8+0 records in
8+0 records out
8192 bytes (8,2 kB) copied, 0,000159338 s, 51,4 MB/s
root@bender:~# dd if=/dev/zero bs=1024 count=8 seek=1346771164 of=/dev/sdc1
8+0 records in
8+0 records out
8192 bytes (8,2 kB) copied, 0,000161977 s, 50,6 MB/s
root@bender:~# dd if=/dev/zero bs=1024 count=8 seek=1348581732 of=/dev/sdc1
8+0 records in
8+0 records out
8192 bytes (8,2 kB) copied, 0,000157825 s, 51,9 MB/s
Very good.
quoted
now i boot my server with a live cd and recreate my raid.
if this was successfully i open the LUKS and check it.
here my commands for this step:
mdadm --create /dev/md2 --assume-clean --verbose --level=5
--raid-devices=4 /dev/sdc1 /dev/sdd1 missing /dev/sdf1
cryptsetup luksOpen /dev/md2 md2_nas
fsck -n /dev/md2
Looks good.

Phil
i created the raid successfulle and the LUKS is open!
this is the output of my fsck
fsck -n /dev/mapper/md2_nas
fsck from util-linux 2.19.1
e2fsck 1.41.14 (22-Dec-2010)
fsck.ext2: Superblock invalid, trying backup blocks...
fsck.ext2: Bad magic number in super-block while trying to open 
/dev/mapper/md2_nas

The superblock could not be read or does not describe a correct ext2
filesystem.  If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
     e2fsck -b 8193 <device>
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help