Thread (10 messages) 10 messages, 5 authors, 2013-02-05

Re: Interpreting mdstat output

From: Brian Candler <hidden>
Date: 2013-02-05 13:49:07

On Tue, Feb 05, 2013 at 01:40:14PM +0000, Brian Candler wrote:
On Tue, Feb 05, 2013 at 01:02:37PM +0000, Robin Hill wrote:
quoted
quoted
1. The UUUU_ and [22/21] suggests that one disk is bad, but is that true?
And if so which one?
No, that's normal. A RAID5 (or RAID6) array is created in a degraded
form, then the last disk(s) are recovered (it's the quickest way of
getting the array ready for use).
Ah I see. Thank you.
The odd thing is, if I make a RAID6 I get [UUUUU] with no underscores?

# cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] 
md127 : active raid6 sdy[23](S) sdx[22] sdw[21] sdv[20] sdu[19] sdt[18] sds[17] sdr[16] sdq[15] sdp[14] sdo[13] sdn[12] sdm[11] sdl[10] sdk[9] sdj[8] sdi[7] sdh[6] sdg[5] sdf[4] sde[3] sdd[2] sdc[1] sdb[0]
      61532835840 blocks super 1.2 level 6, 512k chunk, algorithm 2 [23/23] [UUUUUUUUUUUUUUUUUUUUUUU]
      [>....................]  resync =  0.0% (850232/2930135040) finish=1607.7min speed=30365K/sec
      bitmap: 22/22 pages [88KB], 65536KB chunk

unused devices: <none>

Regards,

Brian.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help