Hi John,
Am Mon, 05 Mar 2012 09:38:34 +0000
John Robinson [off-list ref] schrieb:
On 05/03/2012 07:50, Stefan Priebe - Profihost AG wrote:
quoted
Am 02.03.2012 16:32, schrieb Lars Täuber:
quoted
Hi Stefan,
the metadata versions 1.0 and 1.1 and 1.2 are the same but for the
position of the metadata on disk. Simply use metadata version 1.0 and
everything works as with 0.9.
Grub does to read partition tables inside raid devices.
Sure it does, but that's not the point.
that's new to me. This is true for grub2 only?
You mean if Stefan would have used an old fashioned partition table inside a
Linux SW-RAID with metadata 1.2, grub would have booted like normal?
quoted
quoted
Because a raid1 with metadata 1.0 or 0.9 looks like a plain disk to grub
it can read a partition table like there was no raid array.
For the fourth time, no.
Because a RAID1 with metadata 0.9 or 1.0 looks like a plain disc to the
BIOS, it can read a partition table like there was no RAID array, and
therefore the BIOS can load GRUB.
This might be true for UEFI firmware but for the plain old BIOS too?
I thought the BIOS isn't interested in partitions at all.
Lars
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html